Archery score calculator

Enter the score and maximum for the same arrows

Use the points you scored, the number of arrows included in that score, and the maximum those arrows could have earned. For a partial round or a few practice ends, reduce the maximum to match the arrows you are analyzing.

1. Total the scored arrow values according to the face and rules you used. Resolve scoring questions before entering the total.
2. Count every scored arrow in that total, including misses worth zero. Exclude separate warm-up arrows if their scores are not part of the calculation.
3. Enter the maximum possible for those same arrows. For ordinary practice on a face worth up to 10 points per arrow, multiply the arrow count by 10.
4. Check that the total does not exceed the maximum and that the arrow count is greater than zero. A mismatch usually means the inputs describe different portions of the session.

An end is a group of arrows shot before you score and retrieve them. You can calculate the average for one end, several ends, or a full round. Keep the score, arrow count, and maximum tied to that same selection.

Calculate average per arrow and form percent

Average per arrow = score / arrows shot. If you score 252 points from 30 arrows, the average is 252 / 30 = 8.4 points per arrow. This tells you the mean value of the scored arrows, including any misses. You could reach that same average with a tight group off-center or with arrows spread across several rings.

Form % = score / maximum possible x 100. For that same 252 score out of 300, form is 252 / 300 x 100 = 84%. Here, form percent means the share of available points you earned. It is not a measurement of your posture, release, or shooting technique.

Calculate from the full totals and round the displayed result afterward. Repeatedly rounding each end average before combining ends can introduce small differences. If the arrow count or maximum is zero, the corresponding calculation is undefined; check the inputs rather than recording a zero percent score.

Round maxima for Vegas and World Archery

A Vegas 300 has 30 arrows and a maximum of 300 points. A World Archery 18m round has 60 arrows and a maximum of 600. A World Archery 720 round has 72 arrows and a maximum of 720. Use the round your event actually specifies and check its face and scoring rules.

The Vegas 300 guide, WA 18m guide, and WA 720 guide explain the respective round formats. Do not select a 600 maximum merely because you shot indoors, or a 720 maximum for every outdoor session. The planned round and the number of scored arrows determine the denominator.

If you stop a 10-point practice round after 24 scored arrows, those arrows have a maximum of 240. A score of 204 gives an average of 8.5 and form of 85%. That is a valid partial-session calculation, but label it as 24 arrows rather than presenting it as a completed round score.

What a percentage comparison does and does not show

A score of 270 out of 300 and a score of 540 out of 600 both equal 90%. Both scores leave 10% of the available points unearned, even though one round has twice as many arrows.

Distance, face size, scoring zones, and bow division still affect the task. A 90% result on one face is not proof that you would score 90% on another. Weather and the length of the session also belong in your notes when you compare an indoor result with a longer outdoor round.

Nine points per arrow on a 10-point face means 90% of the maximum. An average from a face with a different top value uses a different scale. Percent of maximum makes the arithmetic comparable while leaving the shooting conditions visible.

For a personal benchmark, compare sessions with the same bow type, face, distance, and round first. The guide to what makes a good archery score explains why a useful goal needs that context.

Avoid averages that hide missing arrows or uneven ends

A miss is part of the scored attempt. If you remove misses from the arrow count while leaving the point total unchanged, the average rises artificially. Keep a zero-point arrow in both the score record and the count so the calculation reflects the session you shot.

When combining ends with different arrow counts, add all points and all arrows before dividing. Suppose one three-arrow end scores 27 and one six-arrow end scores 48. The combined average is 75 / 9 = 8.33 points per arrow after rounding. Averaging the two end averages, 9 and 8, would incorrectly give 8.5.

Keep X counts or other tie-break information separate from the point total unless the event explicitly assigns a different point value. This calculator works from the total you enter; it does not decide which ring value applies to your division or settle a close arrow call.

Use the result to choose a specific practice check

A round average can hide a strong start and a weak finish. Look at end totals before choosing what to work on. If later ends consistently lose points, repeat the same round conditions and track when the decline starts. A single low end cannot establish its cause.

Okami Vision reports form percent alongside session and end breakdowns. Its group size and group center measurements describe a different part of the result: how spread out the arrows are and where they land. A score percentage alone cannot distinguish a tight group away from center from a wider group around it.

For the next comparison, record the round format, target face, distance, arrow count, and any change to equipment. Keep partial rounds labeled. Those details let you tell whether a higher percentage came from a better score under the same conditions or from a different practice task.

Questions